Configuring a Training Workstation to Receive Simulated Host Override Messages.

Configuring a Training Workstation to Receive Simulated Host Override Messages.

EZTeller Enterprise can be configured to run in a simulated host mode. This allows tellers in a training environment to use any account number and real customer accounts will not be affected.


Follow these steps to configure the workstation: 

  1. Browse to C:\Documents and Settings\All Users\Application Data\EZTeller folder and locate the EZEnterprise.ini file.
  2. Double click on the file to open with Notepad.
  3. Add or edit as follows: Simulation=1.
     

Now you are ready to process transactions in a training environment. If you only enter the account number in the account number field, you will get a host acceptance message. If you put an override code in front of the account number, you will get simulated host override messages.

 

The following are three examples of host override codes you can use to get simulated host override messages.

  1. Teller Override:
  • TO<account number>—requires teller override.
  • TO123456.
  1. Manager Override:
  • MO<account number>—requires manager override.
  • MO123456.
  1.  No Override:
  • NO<account number>—rejection, no override allowed.
  • NO123456.

ArticleNumber:

000047795

    • Related Articles

    • Configuring a Branch Workstation to be Used for Training and Processing Customer Transactions.

      You want to use an existing teller workstation for occasional training. You also need to be able to use that workstation to process customer transactions. Follow these steps to setup roles and workstations: Open Superview and select the Admin Bank as ...

    • Renaming an Existing EZTeller Workstation

      The bank wants to change the Workstation Name on existing EZTeller workstations. Steps to Change the Name of a Workstation Log into Superview and select the bank as your working group. Go to Bank > Workstation Setup. Click the + at the left of the ...

    • Installing EZTeller32 on a Windows 7 Workstation

      Refer to the EZTeller 32 Installation Guide when installing EZTeller32 on a Windows 7 workstation. Once installation is completed, these additional steps are required that are unique to Windows 7 workstation. Turn off User Account Controls (UAC). ...

    • Servicing Director Training Guides

      You can view and download the Servicing Director training guides from Support Center. Log on to Finastra Customer Success Community. Select Support Center. Note: If you do not see Support Center, contact your system administrator to request access. ...

    • Loan Setup Review Messages

      Loan Setup review messages are categorized as ‘To Do’, ‘Warning’, and ‘Critical’. Each delivered message is listed below. To Do Messages The ARM flag is set to Yes; the Adjustable Rate information should be set up. The Assistance Balance is greater ...