Configuring the Addmaster IJ2040 printer to work with EZTeller32.

Follow these steps to set up the Addmaster IJ2040 printer in EZTeller32:

1. The EZTeller.ini file is in the C:\Windows directory; open and locate the Printer section.
2. Verify the Printer settings match the following: 
       Port=(confirm the Comport)
       Device=Addmaster IJ2040
       Handshake=RTS
       Baud Rate=9600
       InQueue=128
       OutQueue=4096
       Send EOL=1
       Extra Line Feeds=0
       Batch Ticket Start=6
       Print Balance Start=0
       MICR Font=48
       Data Bits=8
       Stop Bits=1
       Parity=n

3. On the printer, set dipswitch settings #2,#5, #7, and #8 to ON.
4. Follow the below steps to turn off the FIFO Buffers:

• Right click on My Computer > left-click on Properties > select the Hardware tab > click Device Manager.
• Click on the + in front of Ports (COM & LTP).
• Double click on the comport the printer is connected to.
• Select Port Settings tab.
• Click Advanced.
• Uncheck Use FIFO buffers box.
• Click OK.

5. Reboot the PC and sign back on to EZTeller.

ArticleNumber:

000046551