Disabling the Validation Printer on a Workstation

Disabling the Validation Printer on a Workstation

You want to disable the validation printer on a specific workstation.


Environment:

EZTeller
  1. Open Superview and select your role.

Note: Superview access is defined under Security Details. If you don't have access to this module, contact your administrator.

  1. When opening Superview, select a working group to display your structural hierarchy. Select the branch level you are modifying and then click OK. 
  2. Click Profile Options > Workstations > General.
  3. Select Modify only the selected workstation.
  4. Highlight the Workstation you want to edit.
  5. Click the Validations Printing tab.
  6. In the Device box, select None from the drop-down list.
  7. Click Apply.
  8. Click Yes to the message: Profile changes have occurred on the Validation Printing page for 1 workstation. Do you want to save these changes?
  9. Click OK to return to the main screen.

The user must exit EZTeller and restart before this change will be recognized.

 

ArticleNumber:

000046527

    • Related Articles

    • Configuring Addmaster IJ2040 Printer for EZTeller Enterprise

      Configure the Addmaster IJ2040 Printer to work with EZTeller Enterprise. To set up the Addmaster IJ2040 printer in EZTeller Enterprise follow these steps: Open Superview; select Profile Options > Workstations > General. On the Workstations tab, ...

    • Changing Validation Settings in EZTeller

      The default EZTeller validation settings are based on how a typical bank using an Epson TM-U375 printer would validate. Banks using other printer models may need to edit validation settings. Log into Superview at a workstation that has a validation ...

    • Renaming an Existing EZTeller Workstation

      The bank wants to change the Workstation Name on existing EZTeller workstations. Steps to Change the Name of a Workstation Log into Superview and select the bank as your working group. Go to Bank > Workstation Setup. Click the + at the left of the ...

    • Installing EZTeller32 on a Windows 7 Workstation

      Refer to the EZTeller 32 Installation Guide when installing EZTeller32 on a Windows 7 workstation. Once installation is completed, these additional steps are required that are unique to Windows 7 workstation. Turn off User Account Controls (UAC). ...

    • Configuring a Branch Workstation to be Used for Training and Processing Customer Transactions.

      You want to use an existing teller workstation for occasional training. You also need to be able to use that workstation to process customer transactions. Follow these steps to setup roles and workstations: Open Superview and select the Admin Bank as ...