Unable to Duplex Print (Both Sides)

Unable to Duplex Print (Both Sides)

Servicing Director is unable to duplex print documents, where printing is on both sides of the paper.

Workaround:

Set your printer to print duplex by default.

You may be able to configure a separately named printer with the duplex printing default, and then print to that named printer when you need to duplex print.

ArticleNumber:

000064995

    • Related Articles

    • EZTeller Workstation is Unable to Print EZTeller Laser Checks

      EZTeller Laser Checks are not printing on one specific workstation. Workaround: Perform the following steps: Log onto the workstation with the printing issue. Verify that the network printer you will be using for check printing has been added in ...

    • Unable to Print the Teller Recap

      The Teller Recap box is grayed out when trying to select to print. Workaround: Verify the following: Check to see if the the validation printer is turned on. If Superview was opened first on this workstation, it may have attached the printer ...

    • Servicing Director Print Buttons Do Not Print

      When you click any Print button, nothing is printed and there is no error message. Workaround: Confirm the version of Servicing Director and confirm each service pack installed on the local desktop computer. Note: Use the Windows Control Panel > ...

    • Recovery From Database Disconnected When Teller Is Unable to Reconnect

      EZTeller is designed so tellers can process transactions while database disconnected. If the teller stays on the same workstation using the same role, the transactions processed while database disconnected should upload once the connection to the ...

    • Payoff letter will not print

      Your Servicing Director Payoff letter or Payoff statement document will not print. There is no error message, and you may receive a message indicating that the letter printed successfully, but nothing was printed. You find that other documents print, ...